WDMA Store: Window, Entry Door and Skylight StandardsStandardsAAMA/WDMA/CSA 101/I.S.2/A440-22 North American Fenestration Standard (10/23 Revision) Show Details The 2022 edition of AAMA/WDMA/CSA 101/I.S.2/A440, North American Fenestration Standard/Specification for windows, doors, and skylights (NAFS) is the fourth edition of the standard, and supersedes the previous edition published in 2017 under the same title. This standard is jointly published by the Fenestration & Glazing Industry Alliance (FGIA/AAMA), the Window & Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA). This Standard/Specification is applicable for use in testing and rating windows, doors, secondary storm products (SSPs), tubular daylighting devices (TDDs), roof windows, and unit skylights, and represents the continuing development of an internationally accepted performance Standard/Specification for all windows, doors, SSPs, TDDs, roof windows, and unit skylights. Note: This is the October 2023 revision. NAFS-22 has been published with two different covers, one for the U.S. market and one for the Canadian market. The requirements and clause numbering are identical in both documents. WDMA only sells the U.S. cover. Once purchased, you will receive an electronic version of the document. Price: $80.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-17 North American Fenestration StandardShow Details The 2017 edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS — North American Fenestration Standard/Specification for windows, doors, and skylights is the third edition of the standard, and supersedes the previous edition published in 2011 under the same title. This standard is jointly published by the American Architectural Manufacturers Association (AAMA), the Window and Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA). This Standard/Specification is applicable for use in testing and rating windows, doors, secondary storm products (SSPs), tubular daylighting devices (TDDs), roof windows, and unit skylights, and represents the continuing development of an internationally accepted performance Standard/Specification for all windows, doors, SSPs, TDDs, roof windows, and unit skylights. Once purchased, you will receive an electronic version of the document. Price: $80.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-17 NAFS 2017 PrimerShow Details This is the Primer to the AAMA/WDMA/CSA 101/I.S.2/A440, NAFS 2017 — North American Fenestration Standard/Specification for windows, doors, and skylights. Intended for code officials, specifiers, and government agencies, this primer to NAFS-17 provides users with guidance on understanding the standard; an outline of its inception and importance, how the standard is enforced, what products are covered, product testing, and the connection between testing, certification, and labeling. Once purchased, you will receive an electronic version of the document. Price: $0.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-11 North American Fenestration StandardShow Details The 2011 edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS — North American Fenestration Standard/Specification for windows, doors, and skylights is the third edition of the standard, and supersedes the previous edition published in 2008 under the same title. This standard is jointly published by the American Architectural Manufacturers Association (AAMA), the Window and Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA). This Standard/Specification is applicable for use in testing and rating windows, doors, secondary storm products (SSPs), tubular daylighting devices (TDDs), roof windows, and unit skylights, and represents the continuing development of an internationally accepted performance Standard/Specification for all windows, doors, SSPs, TDDs, roof windows, and unit skylights. This edition includes all errata, as of January 2017. Once purchased, you will receive an electronic version of the document. Price: $80.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-11 ErrataShow Details This document identifies the errata to 101/I.S.2/A440-11 officially approved by AAMA, WDMA and CSA in March 2014. This errata supplements the original published edition of the standard. To see a list of those sections that have been modified, click here. Price: $0.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-11 NAFS 2011 Users GuideShow Details This is the first edition of the User guide to AAMA/WDMA/CSA 101/I.S.2/A440, NAFS 2011 — North American Fenestration Standard/Specification for windows, doors, and skylights. It is jointly published by the American Architectural Manufacturers Association (AAMA), the Window & Door Manufacturers Association (WDMA), and CSA Group. Intended users of NAFS include code officials, manufacturers, architects, engineers, consumers, builders, contractors, trade associations, test labs, specifiers, and government agencies. This user guide is intended to provide those users with guidance for the proper application of NAFS. It contains informative commentary, illustrations, and examples to help answer some of the more common questions associated with NAFS. Once purchased, you will receive an electronic version of the document. Price: $45.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-08 (updated) Windows, Doors and Unit SkylightsShow Details Updated Edition -- May 2008 (contains errata and updates to the initial 2008 release) Jointly developed by representatives from the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association (CSA) and the Window and Door Manufacturers Association (WDMA), this is the first truly harmonized North American Window standard. This Standard/Specification incorporates the basic content of the previous editions; AAMA/NWWDA 101/l.S.2-97, Voluntary Specification for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors; AAMA/WDMA 1600/I.S.7, Voluntary Specification for Skylights; AAMA/WDMA 101/I.S.2/NAFS-05, Voluntary Performance Specification for Windows, Unit Skylights, and Glass Doors; CAN/CSA-440-00/CSA A440.1-00, Windows/User Selection Guide to CSA Standard and CAN/CSA-A440-00, Windows. (Includes May 2008 and September 2008 Updates.) PDF Download Price: $65.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-08 ErrataShow Details This document identifies the errata to 101/I.S.2/A440-08 officially approved by AAMA, WDMA and CSA in May 2008 and September 2008. This errata supplements the original published edition of the standard. Price: $0.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-05 (updated) Windows, Doors and Unit SkylightsShow Details Updated Edition -- May 2007 (contains errata and updates to the 2005 edition) Jointly developed by representatives from the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association (CSA) and the Window and Door Manufacturers Association (WDMA), this is the first truly harmonized North American Window standard. This Standard/Specification incorporates the basic content of the previous editions; AAMA/NWWDA 101/l.S.2-97, Voluntary Specification for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors; AAMA/WDMA 1600/I.S.7, Voluntary Specification for Skylights; AAMA/WDMA 101/I.S.2/NAFS-02, Voluntary Performance Specification for Windows, Unit Skylights, and Glass Doors; CAN/CSA-440-00/CSA A440.1-00, Windows/User Selection Guide to CSA Standard and CAN/CSA-A440-00, Windows. This Standard/Specification also incorporates several significant changes and new requirements for products not previously covered, including requirements for side-hinged exterior doors. Other highlights include the introduction of a limited water rating for side-hinged doors; expansion of the product rating system; revision of gateway requirements; introduction of cycle/operating testing for side-hinged doors; introduction of hardware water testing for doors; introduction of vertical load testing for doors; introduction of forced entry resistance testing for doors; and the addition of new sash, frame and glazing material requirements. PDF Download Price: $50.00 PurchaseAAMA/WDMA/CSA 101/I.S.2/A440-05 ErrataShow Details This document identifies the errata and updates officially approved by AAMA, WDMA and CSA in May 2007, to 101/I.S.2/A440-05. The errata uses strikeout and underline to identify the changes. This document can be used to supplement older editions of the standard. PDF Download Price: $0.00 PurchaseANSI/AAMA/WDMA 101/I.S.2/NAFS-02 Windows, Skylights and Glass DoorsShow Details This standard has been developed to bring closer harmony between the various windows standards in North America, as well as incorporating significant improvements and additions to the 101/IS 2 standard. It is the result of close work between WDMA, AAMA, the Canadian Window & Door Manufacturers Association (CWDMA) and the Canadian Standards Association (CSA). Like the 101/IS 2 standard, NAFS-02 is a performance-based standard which includes total unit, material and component performance requirements. The addition of skylights, specialty products, side lites and transoms to the standard brings the total number of operating types recognized in the standard to 26. PDF Download Price: $45.00 PurchaseAAMA/WDMA 1600/I.S. 7-00 Voluntary Specification for SkylightsShow Details AAMA/WDMA 1600/I.S. 7-00 Voluntary Specification for Skylights establishes recognized performance requirements for materials, construction and assembly of complete factory glazed, glass or plastic skylights for both residential and commercial construction. PDF Download Price: $7.00 PurchaseWDMA I.S. 4-19 Industry Specification for Preservative Treatment for MillworkShow Details WDMA I.S. 4-19 Industry Specification for Preservative Treatment for Millwork provides a nationally recognized standard for the water-repellent preservative treatment for millwork and serves as a basis of common understanding for producers, preservative formulators, distributors and users. The Standard is also intended to promote fair competition within the industry and to aid purchasers and users in obtaining properly treated millwork. This latest edition contains additional requirements for formulation product approval. PDF Download Price: $11.00 PurchaseWDMA I.S. 10-19 Industry Specification for Testing Cellulosic Composite MaterialShow Details WDMA I.S. 10-19 Industry Specification for Testing Cellulosic Composite Materials for Use in Fenestration Products applies to composite materials that will be used in the manufacture of fenestration products. It provides a common test basis for composite materials used in the manufacture of fenestration products. Once purchased, you will receive an electronic version of the document. Price: $7.00 PurchaseWDMA I.S. 11-18 Analytical Method for Design Pressure Rating of FenestrationShow Details WDMA I.S.11-18 Analytical Method for Design Pressure Rating of Fenestration Products describes analytical methods for obtaining design pressure ("DP") ratings of fenestration products of sizes other than that of a tested specimen or specimens. For purposes of compliance with this document, DP ratings shall be permitted in increments of no less than one psf. Once purchased, you will receive an electronic version of the document. The document will be sent as a PDF, with an Excel attachment embedded. Price: $15.00 PurchaseTest MethodsWDMA T.M. 1-22 Soil Block TestShow Details WDMA T.M. 1-22 Test Method to Determine Preservative Effectiveness in Preventing Wood Decay evaluates the relative wood preservative effectiveness by means of a laboratory soil block culture. Results of this test are used to recognize commercial millwork preservatives as meeting the requirements of WDMA I.S.4 Water Repellent Preservative Treatment for Millwork. This standard replaces WDMA T.M 1-94 (06). Price: $7.00 PurchaseWDMA T.M. 2-22 Swellometer TestShow Details WDMA T.M. 2-22 Test Method to Determine the Short-term Anti-swell Effectiveness of Treating Systems is designed to measure the effectiveness of water-repellents in millwork preservative formulations in retarding dimensional changes of wood exposed to water. This test method is also used for determining if a commercial millwork preservative meets the requirements of WDMA I.S. 4 Water-Repellent Preservative Treatment for Millwork. PDF Download Price: $11.00 PurchaseWDMA T.M. 13-19 Method for Preparing Retention and Penetration Testing SamplesShow Details WDMA T.M. 13-19 Method for Preparing Retention and Penetration Testing Samples provides a nationally recognized guideline for the performance recommendation and evaluation procedures for Factory Applied Pigmented Coatings on exterior wood and cellulosic composites for millwork products. Once purchased, you will receive an electronic version of the document. Price: $7.00 PurchaseWDMA T.M. 12-20 Pigmented Finishes TestShow Details WDMA T.M. 12-20 , "Test Method for Factory Applied Pigmented Finish Coatings for Wood and Wood Cellulosic Composites Used for Millwork", is available for purchasing on the WDMA Online Bookstore. This test method has been revised by the Material and Supplier Technical Committee to incorporate the most up to date content, provisions and best practices that improve the test procedures and alignment with other recognized industry practices for film thickness, adhesion resistance and color uniformity. These changes improve the test method to create a more uniform guideline for the performance recommendations and clarifies the evaluation procedures for Factory Applied Pigmented Coatings on exterior wood and cellulosic composites for millwork products. Once purchased, you will receive an electronic version of the document. Price: $7.00 PurchaseWDMA T.M. 11-21 Pigmented Primer CoatingsShow Details WDMA T.M. 11-21, Test Method for Factory Applied Pigmented Primer Coatings for Wood and Wood Cellulosic Composites Used for Millwork provides a nationally recognized guideline for the performance recommendations and evaluation procedures for Factory Applied Pigmented Primer Coatings on exterior wood and cellulosic composites for millwork products. Once purchased, you will receive an electronic version of the document. Price: $7.00 PurchaseWDMA T.M. 14-21 Clear and Pigmented Coatings for Interior Prefinished WoodShow Details WDMA T.M. 14-21, Test Method for Factory Applied Clear and Pigmented Coatings for Interior Prefinished Wood and Wood Cellulosic Composites Used for Millwork provides a nationally recognized guideline for the performance recommendation and evaluation procedures for Factory Applied Clear and Pigmented Coatings on interior wood and cellulosic composites for millwork products. It will serve as a basis of common understanding for producers, distributors, and users. It will also promote fair competition within the industry and assist purchasers and end users in obtaining properly coated millwork. Once purchased, you will receive an electronic version of the document. Price: $7.00 PurchaseInstallation StandardsFMA/WDMA 250-10 Installation of Non-Frontal Flange Windows with Mounting FlangesShow Details FMA/WDMA 250-10 Standard Practice for the Installation of Non-Frontal Flange Windows with Mounting Flanges for Surface Barrier Masonry Construction for Extreme Wind/Water Conditions is jointly published by WDMA and the Fenestration Manufacturers Associatiion (FMA). It covers the installation of non-frontal-flanged windows in new construction surface barrier masonry wall buildings of no more than three stories in height. This practice applies to non-frontal flanged windows which employ an integral or applied mounting flange that is attached and sealed to the window perimeter frame designed as an appendage that will cover a previously-installed buck and/or integrate with a pre-formed sill. This standard covers the installation process for windows from pre- to post-installation. Once purchased, you will receive an electronic version of the document. Price: $35.00 PurchaseFMA/AAMA/WDMA 300-12 Installation of Exterior Doors in Wood Frame ConstructionShow Details FMA/AAMA/WDMA 300-12, Standard Practice for the Installation of Exterior Doors in Wood Frame Construction for Extreme Wind/Water Exposure is jointly published by WDMA and the Fenestration Manufacturers Associatiion (FMA) and the Architectural Aluminum Manufacturers Association (AAMA). It covers the installation of exterior doors with mounting flanges, exterior casing/brick molding, and box frame/non-flanged mounting attachments in new construction residential and light commercial buildings utilizing a membrane/drainage system. Installation methods that are consistent with this document have been water tested up to a test pressure of 575 Pa (12 psf) using the ASTM E547 water test. Once purchased, you will receive an electronic version of the document. Price: $35.00 PurchaseFMA/AAMA/WDMA 400-13 Installation of Exterior Doors in Surface Barrier MasonryShow Details FMA/AAMA/WDMA 400-13 Standard Practice for the Installation of Exterior Doors in Surface Barrier Masonry Construction for Extreme Wind/Water Exposure is jointly published by WDMA and the Fenestration Manufacturers Association (FMA) and the Architectural Aluminum Manufacturers Association (AAMA). It covers the installation of exterior doors with mounting flanges, exterior casing/brick molding, and box frame/non-flanged mounting attachments in new construction residential and light commercial buildings utilizing a membrane/drainage system. Installation methods that are consistent with this document have been water tested up to a test pressure of 575 Pa (12 psf) using the ASTM E547 water test. Once purchased, you will receive an electronic version of the document. Price: $35.00 PurchaseFMA/AAMA/WDMA 500-16 Installation of Mounting Flange Windows in FPIS WallsShow Details FMA/AAMA/WDMA 500-16 Standard Practice for the Installation of Mounting Flange Windows into Walls Utilizing Foam Plastic Insulating Sheathing (FPIS) with a Separate Water-Resistive Barrier (WTB) is jointly published by WDMA and the Fenestration Manufacturers Association (FMA) and the Architectural Aluminum Manufacturers Association (AAMA). It covers the installation of windows into walls utilizing foam plastic insulating sheathing (FPIS); and addresses installations for residential and light commercial buildings of not more than three stories above grade plane in height. This standard practice is to address: attachment and continuous support of the window and water management principles for windows installed with FPIS. Once purchased, you will receive an electronic version of the document. Price: $35.00 PurchaseFMA/AAMA/WDMA 2710-20 UL Brick Veneer Window Replacement GuideShow Details FMA/AAMA/WDMA 2710-20, Guidelines for the Full Frame Replacement of Windows without Removal of Exterior Brick Veneer, covers the replacement of windows in residential and light commercial buildings of not more than three stories above grade in height, utilizing a membrane/drainage system, a surface barrier drainage or a wall system without a reliable membrane drainage system. The guideline is focused on the full frame replacement without removal of external brick veneer. This document describes methods where the cavity between the wall and façade needs to be blocked and sealed. It is the responsibility of the installer to determine if this document is applicable to the replacement project, though the assistance of a design professional may be necessary if the existing water management system is found to be defective or inefficient. This guideline does not address any water management concerns beyond the window installation. Once purchased, you will receive an electronic version of the document. The document will be sent as a PDF attachment embedded. Price: $35.00 Purchase |
2001 K Street NW, 3rd Floor North, Washington, D.C. 20006
Phone: 202.367.1157
© Copyright 2021. All rights reserved.